One of the first few topics you learn in O-Level Chemistry (and other basic Chemistry syllabuses) must be Measurement & Experimental Techniques.
The physical quantities that we usually measure are: Mass, Time, Temperature & Volume.
Out of them, measurement of volumes of liquids are considered one of the most important and we need to know the precision / accuracy of the different apparatus.
(Source: Unknown)
Let’s take a look at the different apparatus used for measurement of volumes of liquids:
Measuring Cylinder:
– Measures volumes to the nearest 0.5 cm3
Burette:
– Measures volumes of liquids to the nearest 0.05 cm3
– Used to deliver different volumes of liquids e.g. 24.00 cm3, 28.95 cm3, etc
Pipette:
– Measures out fixed volumes of liquids e.g. 20.0 cm3, 25.0 cm3, 50.0 cm3, etc
Gas Cylinder (BONUS):
– Measures volumes of gases
So far so good?
Let’s take a look at a question then.
Quick Check:
Given the following common laboratory apparatus:
- 100 cm3 measuring cylinder
- 100 cm3 beaker
- 50 cm3 gas syringe
- 50 cm3 burette
- 25 cm3 pipette
- Mass balance
From the common laboratory apparatus listed above, select the best apparatus to perform each of the following tasks. You may use any of the apparatus once, more than once or not at all.
(a) Measuring 60 cm3 of ethanol
(b) Measuring 25 cm3 of nitrogen
(c) Measuring 23.30 cm3 of dilute hydrochloric acid
(d) Transferring 25.0 cm3 of aqueous sodium hydroxide from a round bottom flask into a beaker
Go do it and leave your answer in the COMMENT section below.
PS: Feel free to share this Chemistry blog with your friends.
Related Articles:
- O Levels Chemistry: Secrets of SPA / Chemistry Practicals
- O Level Chemistry Questions: Experimental Techniques / Purification & Separation
- Tips for O-Level Pure Chemistry Paper 3 Practical Exam
- Melamine in Milk Powders – Chemistry put in Wrong Use
- O Level Chemistry: Mole Concepts / Chemical Calculations
zain khan says
Masha Allah
Your work is very simple but is very good.
Thank you so much for providing books and other things through you
ahmed says
it is very helpful and good
Sean Chua says
You can use measuring cylinder of varying sizes since it measures up tp the nearest cm3.
Hope that helps.
Rof says
Then how do I measure 150 ,75 and 40 cm cube of acid
Mwenda says
(a)i think a is the measuring cylinder.(b)gas cylinder (c)burette (d)pipette.
is this correct?
Jing Xuan says
Hi! I’m kind of confused when I come to this type of questions, but I’m going to give it a try…
(a) 100 cm3 measuring cylinder
(b) 50 cm3 gas syringe
(c) 50 cm3 burette
(d) 25 cm3 pipette
Am I right? Please guide me! Thanks. 🙂
tanguy says
this is wonderfull